Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual page 90

Function Tree/Function List
Function name/
Knob
settings
5 OUTPUT PATCH (mLAN OUT CHANNEL)
ST-BUS → 1/2 – 23/24
(17/18 – 23/24 are
w
available in 48kHz/
44.1kHz mode only)
RECBUS →
1/2 – 23/24
r
(17/18 – 23/24 are
available in 48kHz/
44.1kHz mode only)
AUX1/2 → 1/2 – 23/24
(17/18 – 23/24 are
y
available in 48kHz/
44.1kHz mode only)
AUX3/4 → 1/2 – 23/24
(17/18 – 23/24 are
i
available in 48kHz/
44.1kHz mode only)
90
01X Owner's Manual
Explanation
The 01X's Stereo Out, Rec Bus Out, Aux Out 1 through 4 signals can be
patched to any mLAN output channels by using these Output Patch parameters
(also see page 30). Turning the knob immediately changes the routing. The
same output signal cannot be simultaneously routed to multiple mLAN output
channels. In the default settings, the direct out signal of the input channel is
assigned to the corresponding mLAN output channel.
OUTPUT PATCH
ST BUS
REC BUS
AUX 1/2
AUX 3/4
• The direct out setting for a specific channel (see chart below) is cancelled
if the corresponding output channel is assigned to a bus here.
Direct out settings (when Stereo Out, Rec Bus Out
and Aux Out are not assigned to an mLAN pair)
Hardware Input mLAN Output Channel
AD1
:
AD8
mL1
:
mL8
mL9
:
mL16
• The Output Patch settings made here can be stored to the Output Patch
Library (page 91).
mLAN Channel (sequence)
1/2
mLAN Channel (sequence)
3/4
mLAN Channel (sequence)
5/6
mLAN Channel (sequence)
7/8
mLAN Channel (sequence)
23/24
mL1
:
mL8
mL9
:
mL16
mL17
Wordclock =
:
48kHz/44.1kHz only
mL24
Related Block
Prompt
pages diagram
8
No 30
62
8
No 30
62
@3
8
No 30
62
8
No 30
62