Start Recording - Yamaha Tyros3 Owner's Manual

If you want to record to specific channels or change the MIDI channels
assignment:
While holding the SONG [REC] button, press the [1 ▲▼]–[8 ▲▼] buttons to
set the desired channels to "REC", then assign the desired part to the channel by
using the [C]/[D] buttons. (This is called "Multi Recording.")
3

Start recording.

Recording begins automatically as soon as you play a note on the keyboard, start
3
3
Style playback or start Multi Pad playback.
4
Press the SONG [STOP] button to stop recording.
A message prompting you to save the recorded performance appears. To close the
message, press the [EXIT] button
5
Press the SONG [PLAY/PAUSE] button to play back the
recorded performance.
6
If necessary, re-record a specific channel (or record another
channel) of the recorded Song or record an additional section
to the end of the recorded Song.
Repeat steps 2–5 above.
7
Save the recorded performance as a Song to the USER, HD or
USB drive.
Press one of the SONG [I]–[IV] buttons and call up the USER, HD or USB Page
by pressing the TAB [
your performance as a Song file (page 30).
58 • Tyros3 Owner's Manual
] button. Then press the [6 ▼] (SAVE) button to save
Q Q Q Q ][ W W W W
NOTE
When recording without Style playback,
turning the [METRONOME] on makes
your recording sessions much more
efficient. The Metronome tempo can be
adjusted by TEMPO [-]/[+] buttons.
CAUTION
The recorded Song will be lost if
you change to another Song or
you turn the power off without
executing the save operation.
NOTE
By default, pressing the SONG [I] but-
7
ton calls up the PRESET Page and
pressing one of the [II]–[IV] buttons
calls up the USER Page.
7