Appendix; Installing The Optional Speakers - Yamaha Tyros3 Owner's Manual

Appendix

Installing the Optional Speakers

Make sure that you have all of the parts below, included in the TRS-MS02 speaker package.
Satellite
speakers (2)
1
Turn the Tyros3's power off, and disconnect the AC power
cord. Also, make sure to disconnect the keyboard from any
other external devices.
2
Insert the two speaker brackets to the rear panel of the Tyros3.
3
Fasten the satellite speakers to the left and right brackets.
Place the speaker on
the bracket.
4
Use the RCA pin cables to connect the speakers to the respec-
tive outputs on the Tyros3.
100 • Tyros3 Owner's Manual
Subwoofer Speaker
speaker (1) brackets (2)
Use the outside
slots (as shown).
Adjust the direction of the speaker as desired,
then fasten it securely to the bracket.
RCA pin RCA pin/8-pin
cables (2) combination cable (1)
NOTE
Either bracket can be fastened to either
location.
NOTE
Either speaker can be placed on either
bracket.
NOTE
If you want to change the direction of
the satellite speaker, unfasten it from the
bracket by rotating the lever, then adjust
the speaker position as desired, and
fasten it to the bracket again.
NOTE
Either cable can be used for either loca-
tion.