Yamaha Tyros3 Owner's Manual page 43

● Type 2
In this type, playing the keyboard while holding down the available [ART] button
changes the nature of Voice. For example, in the case of the SA Nylon Guitar Voice, hold-
ing down the [ART. 1] button lets you play harmonics for the guitar Voice. Releasing the
button returns the Voice to normal. In the case of SA BigBandBrass Voice, normally there
is a pitch "shake" when you play at a higher velocity, but if you hold the [ART. 1] button
while you play, the shake will be replaced by a fall.
The button lights in red while it is being held down.
Green
● Type 3
With this type, pressing the available [ART] button alters the attack and release of the
note. Each [ART] button has two different effects, depending on whether you press it
before you play a note, or while you are holding a note.
For example, in the case of SA2 Jazz Trumpet, pressing the [ART. 1] button before you
play a note produces a bend up to the note you first play. Pressing it while you are holding
a note will produce a bend down as you release the note. Pressing the [ART. 2] button
before playing a note will produce a long glissando up to the note you are playing, and
pressing it while holding a note will produce a fall when you release the note.
When you press the available [ART] button, it will flash in red until the effect is finished
playing. You can cancel by pressing the button again while it flashes. Just after you press/
release the note and articulation effect sounds, the button lights in red.
Green
Green
Type 3 effects can also be used as the same manner as Type 2. Holding an [ART] button
(the button flashes in red) and playing/releasing a note enables you to add the articulation
effect several times in succession.
Notice for when Super Articulation Voices are selected for multiple parts
When you select SA/SA2 Voices for two or more keyboard parts, using an [ART] button simultaneously
affects all parts on which SA/SA2 Voices are selected.
When a Type 3 effect is assigned to both the Right and Left parts and an [ART] button flashes in red (standby
status), playing only one part (for example Right part) adds an articulation effect to only the Right part. Since
the other part (Left part) is kept in standby status, the button continues flashing. To cancel the standby status,
you need to play the keyboard in the Left part range. (Pressing the flashing button cannot cancel standby sta-
tus, because this can cancel the standby of the Left part but turns the Right part to standby again.)
Red
Red
(flashing)
Red
(flashing)
Articulation
Sound
NOTE
Keeping with the realistic response of
the original instruments, the effects
applied vary depending on the range
you are playing in.
Articulation
Sound
Key on
Red
(lit)
Articulation
Sound
Key off
Red
(lit)
Tyros3 Owner's Manual • 43
1
1