Start Recording - Yamaha AvantGrand N3X Owner's Manual

4
Select a Voice (page 20) and other parameters such as Beat
(page 22) for recording.
5
Press [RECORD] to engage the Record mode.
The [RECORD] lamp lights up, and the [PLAY/STOP] lamp flashes according to
the current tempo.
Lights up
To exit from the Record mode, press [RECORD] again.
6

Start recording.

Play a note on the keyboard or press [PLAY/STOP] to start recording.
With MIDI Recording:
While recording, the current measure number is shown on the display.
With Audio Recording:
While recording, the elapsed time is shown on the display.
7
Press [RECORD] or [PLAY/STOP] to stop recording.
Dashes appear on the display in succession, indicating that the recorded data is
being saved. After the data is saved, an "
onds, indicating that the Record mode is disengaged.
NOTICE
While dashes appear in the display in succession, never turn off the power or disconnect
the USB flash drive. Doing so may delete all Song data in the instrument, including exter-
nal Songs (page 31).
8
Press [PLAY/STOP] to hear the recorded Song.
To stop playback, press [PLAY/STOP] again.
Deleting a Song file
If you want to delete the recorded Song, refer to page 39.
1. 2.
Measure number
0. 0 1. 0. 0 2.
Elapsed time
Indicates minutes. In Indicates seconds.
case of 10 minutes
or more, only the
lowest digit is
shown.
End
" message appears for three sec-
Flashes
Recording Your Performance
Using the Metronome
You can use the metronome while record-
ing, although the metronome sound will not
be recorded.
If memory space is running low:
An " EnP " or " FUL " message will
appear in the display after pressing
[RECORD]. If " Enp " appears, you can
start recording, but the memory may
FUL
become full during recording. If " "
appears, you cannot start recording. We
recommend that you first remove any
unnecessary files (page 39) to ensure suffi-
cient memory capacity.
NOTE
If the memory becomes full, or the record-
ing data or time exceed the maximum limit
for one song during recording, " FUL "
appears on the display and recording will
stop automatically. In this situation, press
any button to clear the " FUL " indication.
Keep in mind that your performance data
may not have been correctly saved.
NOTE
With audio recording, the sound input from
the [AUX IN] jack is also recorded.
NOTE
The recorded User Song data on this
instrument can be saved to a USB flash
drive. Refer to page 38.
N3X • 35
Owner's Manual