Yamaha Tyros3 Owner's Manual page 74

17
When finished recording, press the [STOP] button.
18
To hear your new recording, press the [PLAY/PAUSE] button.
Adjusting volume balance
In the VOLUME Page, you can adjust the volume of Main and Sub tracks sep-
arately. Use the [3 ▲▼]/[4 ▲▼] buttons or sliders to adjust the Main/Sub
track volume. By using the [2 ▲▼]/[5 ▲▼] buttons, you can also mute the
Main/Sub tracks.
19
Press the [I] (SAVE) button to save the new recording, then at
the prompt, press the [G] (OK) button.
Next, mix all data from the Main track and Sub track to one track (Main track). The pro-
cedure below is called "Bounce Recording."
20
In the REC MODE Page, use the [A]/[B] buttons to select
"BOUNCE."
20
21
Press the [REC] button to enable recording.
22
Press the [PLAY/PAUSE] button to start recording.
All data in Main and Sub track are mixed and recorded to the Main track. When
7
7
the playback of both tracks finished, Bounce recording automatically stops.
23
To hear your new recording, press the [PLAY/PAUSE] button.
At this point, the data of Sub track is recorded to both Main and Sub tracks. To
avoid duplicate playback of Sub track, press the [5 ▲▼] (SUB MUTE) button in
the VOLUME Page.
24
In the REC MODE Page, press the [G] (TRACK DELETE SUB)
button to delete the Sub track.
25
Press the [I] (SAVE) button to save the recording.
Now all the data recorded to Main and Sub tracks are merged and recorded to
only the Main track. Since the Sub track is now empty, you can continue record-
ing another part to the Sub track, repeating steps 13–19 above.
74 • Tyros3 Owner's Manual
NOTE
If you sing or play the keyboard during
the Bounce Recording, your perfor-
mance is also recorded to the Main
track.
24