Yamaha Tyros3 Owner's Manual page 92

Adding Effects to The Microphone Sound
Use the [EFFECT] button to determine the on/off setting of the effect applied to the microphone, set in the Mixing
Console display (page 78).
Applying Harmony Vocals to Your Voice
You can automatically apply various harmony vocals to your voice as you sing into the connected microphone.
1
Press the [VOCAL HARMONY] button to turn the function on.
2
Press the [VH TYPE SELECT] button to call up the Vocal Har-
mony Type Selection display.
3
Select a Vocal Harmony Type by using the [A]–[J] buttons.
To call up the other display pages, press one of the [1 ▲]–[7 ▲] buttons or press
10
10
the [VH TYPE SELECT] button again.
4
Turn the [ACMP] button on.
5
Play and hold down chords in the left-hand section of the key-
board as you sing along with the accompaniment.
The harmony is applied to your voice according to the chord you play.
92 • Tyros3 Owner's Manual
3
NOTE
You can adjust the volume balance
between the keyboard performance and
the microphone by using the [BAL-
ANCE] button. Refer to page 55.