Using The Multi Pad Synchro Start Function; Using Chord Match - Yamaha Tyros3 Owner's Manual

Using the Multi Pad Synchro Start Function

While holding the MULTI PAD CONTROL [SELECT] button, press one of the MULTI PAD CONTROL [1]–[4]
buttons to put the Multi Pad playback in standby. The corresponding button will flash in red. You can even play two,
three, or four Multi Pads at the same time.
The Multi Pad currently set to standby will start playing when you play back a Style,
press any note on the keyboard (when [ACMP] is off ), or play a chord with your left
hand (when [ACMP] is on). If you put the Multi Pad in standby during Song/Style play-
back, pressing any note on the keyboard will start the Multi Pad playback at the top of
next bar.
When two or more Multi Pads are in standby, pressing one of them simultaneously starts
all Multi Pads that are set to standby.
To cancel Synchro Start, while holding the MULTI PAD CONTROL [SELECT] (or
[STOP]) button, press one of the [1]–[4] buttons. Pressing the MULTI PAD CON-
TROL [STOP] button once cancels Synchro Start of all buttons.

Using Chord Match

Many of the Multi Pad phrases are melodic or chordal and you can have these phrases automatically change chords
along with the chords you play with your left hand. When the [ACMP] is on or LEFT part is on, simply play a chord
with your left hand and press any of the Multi Pads—Chord Match changes the pitch to match the chords you play.
Keep in mind that some Multi Pads are not affected by Chord Match.
In this example, the phrase for Pad 1 will be transposed into F major before. Try out other various chord types while
playing the Multi Pads.
Advanced Features
Multi Pad creating (Multi Pad Creator):
Multi Pad editing:
Chord Section
[DIGITAL RECORDING] → [C] MULTI PAD CREATOR
Multi Pad Bank Selection display → [8 ▼] (EDIT)
Refer to the Reference Manual on the website.
Tyros3 Owner's Manual • 65
4
4