Gtp 59; Gtp 59 Removal; Gtp 59 Re-Installation; Gtp 59 Checkout - Garmin GI 275 Maintenance Manual

5.9.1

GTP 59 Removal

To remove the GTP 59, perform the following procedure:
1. Remove power from the GI 275 that is directly interfaced to the GTP 59.
2. Remove the mounting nut shown in Figure 5-13.
3. Remove the GTP 59 from the hole.
5.9.2

GTP 59 Re-installation

1. Place the GTP 59 in the previous installation hole.
2. Install washer and nut and torque to specifications in Figure 5-13.
5.9.3

GTP 59 Checkout

Perform the Primary ADI checkout procedures in Section 6 of GI 275 Part 23 AML STC Installation
Manual (P/N 190-02246-10).
190-02246-11
Rev. 1
GI 275 Part 23 AML STC Maintenance Manual
Page 5-23