Saved Configuration File; Print Configuration Log - Garmin GI 275 Maintenance Manual

A.6 Saved Configuration File
The GI 275 system configuration must be saved to a USB drive and placed with the permanent aircraft
maintenance records. For instructions on saving the aircraft configuration file to a USB drive, refer to
Section 2.1.10. It is recommended that the USB drive be taped or otherwise secured to this page in the
location marked below.
A.7 Print Configuration Log
The GI 275 system configuration log must be printed out and included with the permanent aircraft
maintenance records. To print the system configuration log, perform the following procedure:
1. Save the aircraft configuration file to a USB drive (refer to Section 2.1.10).
2. Insert the USB drive into a computer.
3. Open the USB drive main directory.
4. Navigate to the "summary" folder.
5. Open the file with the name you entered to save your aircraft configuration.
6. Print the configuration log.
7.
NOTE
It is recommended that the configuration log be attached to the back of this document for
continuity and ease of use. It is required that the MM/ICA, USB drive, and configuration log
be included in the permanent aircraft maintenance records.
The configuration log printout contains configuration info for configured EIS gauges, including
configured markings and gauge layout for each GI 275 displaying EIS gauges.
190-02246-11
Rev. 1
Aircraft Configuration USB drive
GI 275 Part 23 AML STC Maintenance Manual
Page A-6