2.3.4
Export Configuration
Configuration settings can be exported via USB using the following procedure:
1. Power the GI 275 and all LRUs in the system on in Configuration mode.
2. Insert a USB drive into the USB dongle or GSB 15 (if installed). A USB icon should appear on the
left of the display once the GI 275 has recognized the device. If the icon doesn't appear after 1
minute, remove the drive and re-insert it.
3. Navigate to the Config Options page (SW/Config → Config Options).
4. Touch the Export Config button.
5. Touch the Select Name field and enter a name for the saved file.
6. Touch the Export Config button.
190-02246-11
Rev. 1
GI 275 Part 23 AML STC Maintenance Manual
Page 2-7