Table of Contents
Advertisement
Installation
5
Installation
This section describes the process of installing the digital cylinders in doors.
Two installation variants are available, with the variant selected depending on the type of
digital cylinder, its profile and the type of door furniture (with or without profile cutout).
5.1
Tools required
• Kaba service tool, item number 1430-25
• Hexagonal screw, hex 1.5 mm, item number 1430-55
• Cross-head screwdriver for forend locking stud, size PZ 2
5.2
Installation variants
With installation variant A, remove the inner door knob and push the cylinder through the
door furniture and the lock, from the outer side of the door.
With installation variant B, remove the outer door knob and also the inner door knob if
necessary, and push the cylinder housing through the door's lock.
Type
1435
Standard
1434
Half
1)
1437
Anti-panic
1439
Dual
1535
Standard
1534
Half
1)
1537
Anti-panic
1539
Dual
1)
The furniture on the inner side requires a recess for the bridge.
18
Variants
A
recommended
--
recommended
--
not recommended
--
not recommended
--
k1evo805en-2012-09
B
optional
optional
optional
recommended
recommended
optional
possible
1)
recommended
Kaba digital cylinder
User manual
Advertisement
Table of Contents
