Kaba 1435MID User Manual page 26

Installation
The outer door knob can only be attached in one position. The Kaba logo and the
upper surface of the battery compartment must be on the same side.
17.Insert the battery. See page 28.
18.Push the outer door knob over
the electronical module.
19.Attach the service tool to the
outer door knob.
20.Rotate the service tool
anticlockwise and lock it. The
outer door knob and the
cylinder housing are now firmly
connected.
21. Tighten the forend locking stud.
22.Check that the door knobs
function correctly. Both door
knobs can be turned without
touching the door furniture.
23.Check the backset. The door
knobs must not knock against
the door frame.
26 k1evo805en-2012-09
18
19
22
Kaba digital cylinder
User manual
20
21
22