Table of Contents
Advertisement
User manual
Inserting the battery
5. Take care to observe the polarity
of the battery! Insert the new
battery.
Once the battery has been
inserted, the LEDs glow green
for a short time. This indicates
that the self test has been
successful.
Assemble the outer door knob
The outer door knob can only be attached in one position. The Kaba logo and the
upper surface of the battery compartment must be on the same side.
6. Push the outer door knob over
the door knob module.
7. Attach the service tool to the
outer door knob.
8. Turn the service tool
anticlockwise and lock it. The
outer door knob and the
cylinder are now firmly
connected.
9. Check that the digital cylinder
functions correctly.
Kaba digital cylinder
5
9
k1evo805en-2012-09
Commissioning
6
7
8
29
Advertisement
Table of Contents
