Service Keypad Installer Tool; Addressing - Bosch CP700B Installer's Reference Manual

Graphic Keypads Installer Reference Guide

Service Keypad Installer Tool

The CP799B Service Keypad has been designed to assist the installer or service technician when working on selected
Solution control panels.
The keypad can be temporarily plugged onto any module on the
system that has a service port header via it's built in 1.5m lead.
CP799B Compatibility
Panel
Solution 6000
Table 10: CP799B Compatibility
Once connected it allows the installer to easily log into program-
ming mode, interrogate zone or output status, review the history
log and perform other functions as if they were using the main
keypad.
This is particularly useful in large installations where a number
modules are dispersed around the building or in separate build-
ings and the main system keypads are located some distance
away.

Addressing

Unlike other keypads, the service keypad does not need to be
addressed which means there is no need to scan the LAN for the
system to recognise it. Built in security means that the system will only respond to the service keypad if the panel
has been placed in service mode from one of the main keypads or if the panel cabinet tamper input is unsealed.
Service keypad operation will cease when service mode ends or the cabinet tamper is sealed.
The CP799B keypad includes a built in DF smart card reader allowing RFID cards and tokens to be easily enrolled di-
rectly at the keypad if required. Alpha text characters have also been included on the keypad buttons which will can
help to speed up text entry at the keypad.
Features
Plug On Connection To Modules With Service Ports
No Need To Assign A Keypad Address
Alpha Characters On Keys To Aid Text Programming
Operates When System In Service Mode
Operates When Cabinet Tamper Is Unsealed
10
Service Keypad Installer Tool
Supported
2.16
You should always exit programming mode via the
i
service keypad before disconnecting it from the sys-
Note
tem. Failure to do this may prevent the system from
arming because programming mode is still active.
CP799B
Allows Programming At The Panel During Install
Flexible 2 Metre Connection Lead
Leads Can Be Easily Replaced When Needed
Built In Smart Card Reader Simplifies Enrolment
3 Year Factory Warranty (Return To Base)
Bosch Security Systems 03/16 Graphic Keypads BIRG FTR1.0