Air Hose; Regulator Kit/Assembly; Oxygen Hose; Magnalube-G - AirSep AS-A Instruction Manual

®
AirSep Corporation
Please contact an AirSep Corporation sales representative to order the starter kits.
Below is a brief description of items included in the starter kits.

Air Hose

Red color rubber hose supplied for the inlet connection of the oxygen generator.

Oxygen Hose

Stainless steel braided hose supplied for the outlet connection of the oxygen
generator.

Regulator Kit/Assembly

This assembly contains the following items:
- Pressure Regulator for Product Oxygen
- Pressure Gauge
- Vent Valve with Muffler (Helps purge low purity oxygen during initial start-
up. Please refer to chapter 6 for details)
This assembly should be mounted at the outlet of the oxygen receiver.

Magnalube-G

Grease for lubricating the feed air regulator
In addition to the starter kits, few other accessories are also available. These are
listed below.
AS-A—AS-P Series Instruction Manual
Model
Hose Assembly from air compressor to
AS-A,
air receiver (1/2" MPT)
Hose for Oxygen Service #6, ¼" MPT
AS-B
connections
Air Receiver (120 VAC ~ ±10%)
Air Receiver (240 VAC ~ ±10%)
Oxygen Receiver
Manual Backup Switchover
Hose Assembly from air compressor to
AS-D,
air receiver (1/2" MPT)
Hose for Oxygen Service #6, 1/4" MPT
AS-D+
connections
Air Receiver (120 VAC ~ ±10%)
Air Receiver (240 VAC ~ ±10%)
Oxygen Receiver
Manual Backup Switchover
Hose Assembly from air compressor to
AS-E
air receiver (1/2" MPT)
Hose for Oxygen Service #8, 3/8" MPT
Item
4-9