Filter; Air Intake Filter - AirSep FreeStyle Patient Manual

EN

Filter

Air Intake Filter

At least one time each week, remove the cover on the lower front of the unit, and
wash the air intake filter, which is positioned on the inside of the cover. Your
Equipment Provider may advise you to clean it more often, depending upon your
operating conditions. Follow these steps to properly clean the air intake filter:
1. Remove the filter from the air intake filter cover, and wash it in a warm
solution of soap and water.
2. Rinse the filter thoroughly, and remove excess water with a soft,
adsorbent towel. Ensure that the filter is dry before replacing it.
3. Replace the dry filter.
Do not operate FreeStyle without the air intake filter in place. If a
second filter is provided, insert the "replacement" filter before you
clean the dirty filter.
AirSep does not recommend the sterilization of this equipment.
EN-34
FreeStyle™
®
AirSep Corporation
MN131-1 rev. B - 02/13