Handling An Incoming Call If You Do Not Announce Calls - AT&T SYSTEM 25 User Manual

Handling an Incoming Call If You
Do Not Announce Calls
You can use either the SLAC or the Selector Console to extend
calls. If you extend a call from outside the System 25 to a busy
voice terminal, the caller will be placed on hold and the called
party will hear a tone that indicates they have a waiting
(camped-on) call. If the called party does not choose to take the
call, it will be returned to you after a preset interval.
Your System 25 is set for either Automatic Release or Automatic
Hold. If your system is set for Automatic Release, to drop out
of a call, simply hang up or select another (LOOP) instead of
pressing (RELEASE) . Check with your System Administrator to
see which feature you have.
If you want to extend an outside call to another outside line, see
the entry for "Transfer" on page 87.
Extending a Call Using the SLAC
3 Press (RELEASE) and then hang up.
2 6
1 Press (START) and listen for dial tone.
2 Dial the PDC.
the called party does not answer,
NOTE: If
the call will return to the console. Similarly,
camped-on calls that are not answered will
return to the console.
(Continued)
-