Conference Call - AT&T SYSTEM 25 User Manual

Conference Call

You can set up a conference that includes other System 25
stations as well as outside callers. You may have a maximum of
five conferees. However, no more than two may be on outside
lines.
Setting Up a Conference
1 Dial the first party.
2 Announce the conference call.
3 Press
4 Dial the second party or press the line button
5 Announce the conference call.
6 Press the button next to the winking light to
7 If you want to add additional conferees,
CONFERENCE
– The green light next to the button of the
held call winks.
for that party. You can use the following line
b u t t o n s :
Note
If, for any reason, this call should not be
added to the conference (busy, no answer, or
misdial), you should do the following:
Press the switchhook and then release,
If you are reconnected to the first party,
return to step 3 and continue.
Otherwise, return to step 4 and continue.
join the conference parties together.
return to step 3 and continue.
listen for dial tone
(Continued) 13