Advertisement
Available languages
Available languages
Fix ground tube between the net hoops, screw 1 self-locking nut M8, DIN 985
and then tighten all screws and nuts (see picture at the bottom).
3. Assembly of the net
a) The net is not part of delivery.
Make sure that the groove of the goal is clean and all packing material or other
material is removed so that the assembly is possible without any problems.
Now fix and adjust the net rope in the groove. Then stick net holders with its
clips into the groove and fix them with a 90° rotation. Fixing is either possible
manually, with the key for hexagon socket screws or with a pliers (see bottom
pictures). Distribute net holders equally (same distances).
We recommend the following distribution of net holders:
crossbar
upright
corner (upright/crossbar) : each 2 pieces (net holder orange)
upright bottom
Use all the other included net holders for the other connections.
hole to fix the ground
tube
:
:
: each 9 pieces (net holder black)
:
17
13 pieces (net holder black)
1 piece (net holder orange)
Advertisement
