Sport-thieme 2010915 Assembly Instruction Manual page 14

Handball goal with rigid steel net hoops steel corner joint

Hide thumbs Also See for 2010915:

Available languages

a) Assembly of crossbar/uprights: Lay crossbar and uprights on the ground,

groove facing upwards and mitres joining. Stick 4 steel plates on steel corner

joint (see 1

picture bottom left). Then stick crossbar and upright on steel

corner joint (see other bottom pictures).

b) Assembly of net hoops: Place rigid net hoops on the right and left side of

crossbar/upright construction. Fixing of net hoop at the top: Screw 4 hexagon

socket screws M8 x 50, DIN 931 into the steel corner joint (see picture bottom

left).

Current State of assembly

2034502