Nokia IP71 User Manual page 46

3
Configuring IP71
You can securely configure your IP71 from a remote location using SSH. The
IP71 supports client-based SSH through both the HTTP GUI and the CLI.
Configure the SSH client before you configure the IP71 using SSH. You need
the following to configure using SSH:
LAN and WAN IP addresses are defined using the Wizard setup.
n
The IP71 has an active connection to the computer with the SSH client.
n
Note
SSH is enabled by default from the LAN and WAN.
SSH Authentication
To connect to the IP71 from a remote computer using SSH, first authenticate
the SSH connection. You can authenticate an SSH connection using:
Password
n
Public Key
n
Either
n
Figure 11 Configuring Through SSH
46 Nokia IP71 User Guide