SBC PCD7.LR P5 Series Manual page 120

Saia-Burgess Controls AG
"Unoccupied" mode
CONFIGURED FOR DISPLAY OF
ENGLISH
If is displayed, the controller is in "Unoccupied" mode.
The user can override the "Unoccupied" mode by pressing the right-hand software
key.
An intermediate display flashes for a few seconds, giving the user the opportunity
to press either "Cancel" (left-hand software key) or "Confirm" (right-hand software
key).
If the user does not press either key, this is taken as a confirmation and the con-
troller is switched to the "Override/bypass" mode. If the user cancels the process,
the controller switches back to the "Unoccupied" mode.
Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
CONFIGURED FOR DISPLAY OF
SYMBOLS
H/C
OFF
AUTO
2.0
°C
FAN OVERRIDE
OVERRIDE
OVERRIDE
CANCEL DONE
H/C
AUTO
AUTO
2.0 OVERRIDE
°C
FAN CANCEL OVR
OVERRIDE
CANCEL OVERRIDE
CANCEL DONE
"Unoccupied" example is displayed
Room operating devices
Sylk bus FBoxes
H/C
OFF
AUTO
2.0
°C
H/C
AUTO
AUTO
2.0
°C
7
7-10