Saia-Burgess Controls AG
Furthermore, the LEDs on the PCD7.L632, Q.RCU-A-TSO and the LC display of
the PCD7.LR-TR42x can be configured to provide information on the following:
O verriding of the controller, e.g. by pressing the "Occupancy" key on the room
operating device or by receiving a network command via the controller
(see section "LEDs on room operating devices for displaying information on
overrides" below).
E ffective occupancy mode of the controller
(see the following section "Configuring the LEDs on room operating devices for
displaying information concerning occupancy").
Supported functions of Q.RCU-A-txxx
room operating devices
Q.RCU-A-T
Q.RCU-A-TS
Q.RCU-A-TSO
Q.RCU-A-TSOF
Supported functions of PCD7.L63x room operating
devices
PCD7.L630
PCD7.L631
PCD7.L632
* An output is additionally needed to operate the LED. Only the PCD7.LRL2-P5 has a
dedicated LED output. Other variants require an AO that can operate at a minimum of 5 mA.
Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
●
─
─
─
●
●
─
─
●
●
●
─
●
●
●
auto-0-1-2-3
●
─
─
─
●
●
─
─
●
●
●
─
Overview of room operating devices
─
1
─
2
●
2
●
3
─
1
─
2
●
2
Room operating devices
7-3
7