Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
I
NTERFACES
Interface
DTE
ISDN
ISDN Data Rates
LAN
WAN
Audio
External Control
Dimensions
Environmental
Weight
Power
Lump-in-Line PSU
Revision 2
Information
25 way D-Type female connector, V.24/V.28. (Used for
Production Test purposes only).
PRI S/T:
1 x RJ45 socket (optionally 2). ETSI S/T Interface
to CTR4 for Pan European Connection.
BRI S/T:
4 x RJ45 sockets. ETSI S/T Interface to CTR3 for
Pan European Connection. (optional).
PRI:
B-channel 64kbps or 56kbps, D-channel 64kbps.
BRI:
B-channel 64kbps or 56kbps, D-channel 16kbps.
8 x RJ45 sockets, on the front of the unit. 10BaseT/100BaseT
Ethernet (10/100Mbps). Port 8 is MDI/MDIX switchable via the
adjacent Daisy Chain pushbutton switch.
1 x 37 way D-Type female socket. X.21 interface to 2048k bps,
V.35 interface to 2048k bps and V.24 Interface to 19k2 bps.
1 x 3.5mm Stereo Jack socket.
Input impedance - 10k /channel.
Operational input voltage level - 1V rms.
Maximum a.c. signal for mono – 200mV rms.
Maximum a.c. signal for stereo – 100mV rms.
1 x 3.5mm Stereo Jack socket.
Switching Capacity – 0.7A.
Maximum Voltage – 55V d.c.
On state resistance – 0.7Ω.
Short circuit current – 1A.
Reverse circuit current capacity – 1.4A.
Width:
445mm.
Height:
71mm.
Depth:
245mm.
0 to +40°C.
95% relative humidity, non-condensing.
Unit + PSU – 3.50 Kg.
2.5mm DC inlet socket (BLUE). 16Vdc Power input. Rating -
16Vd.c., 2A max. The Power Adapter is CE Safety Approved.
The unit's power consumption is nominally 32 Watts.
Power Requirements: 230Vac, 50Hz
Section 2: Technical Data
Unit only – 3.00Kg.
35
Advertisement
Table of Contents
