Removing & Installing Body Components; Battery - Honda Rebel 250 2016 Owner's Manual

Removing & Installing Body Components

Battery

Negative terminal
❙
Removal
Make sure the ignition switch is off.
1. Remove the right side cover.
50
2. Release the rings and remove the rubber
3. Disconnect the negative
Rubber band
4. Disconnect the positive
5. Remove the battery taking care not to
Positive
❙
terminal
Installation
Install the parts in the reverse order of
Battery
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 51
2
band.
the battery.
the battery.
drop the terminal nuts.
2
terminal from
-
terminal from
+
+
P. 40
2
P. 86