Honda Rebel 250 2016 Owner's Manual page 62

Adjusting the Rear Brake Pedal
Height
The stopper bolt is provided to allow
adjustment of the pedal height.
1. Place your motorcycle on its side stand on
a firm, level surface.
2. Loosen the lock nut and turn the stopper
bolt.
3. Tighten the lock nut and check the
freeplay.
Lock nut
Stopper bolt
Brakes
Inspecting the Rear Brake Pedal
Freeplay
1. Place your motorcycle on its side stand on
2. Measure the distance of the rear brake
Brake pedal
Make sure the brake rod, brake arm, spring
and fastener are in good condition.
Adjusting the Rear Brake Pedal Height
u
a firm, level surface.
pedal before the starts to take hold.
Freeplay at the tip of the brake pedal:
13/16 to 1 3/16 in (20 to 30 mm)
Freeplay
61