Honda Rebel 250 2016 Owner's Manual page 83

Tire Puncture Removing Wheels
u
Installation
1. Attach the side collar and speedometer
gearbox to the wheel.
2. Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the right fork leg and
wheel hub.
NOTICE
When installing the wheel, carefully fit the brake disc
between the pads to avoid scratching them.
3. Position the lug on the speedometer
gearbox against the stopper on the left
fork leg.
4. Tighten the front axle shaft.
Torque: 45 lbf·ft (61 N·m, 6.2 kgf·m)
5. Tighten the axle pinch bolt.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
82
Lug
6. After installing the wheel, apply the brake
lever several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
7. Install the speedometer cable and tighten
the speedometer cable set screw securely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Stopper