Table of Contents
Advertisement
Keystone OM3 - EPI-2 LOcaL IntErfacE MOduLE
InstallatIon and MaIntenance InstructIons
7. SafEtY InStructIOnS
7.1 foreWord
this section is an integration of the base
manual VcIOM-02881 when additional Local
control Panel is added to a base unit; when
this combination is used both manuals
VcIOM-02881 and VcIOM-01496 must be used.
7.2 generaL safety InstructIons
the devices to which these safety instructions
apply are Electrical actuators for industrial
valves Series f02 and EPI-2 equipped with
optional module Local control Panel identified
by EPI-2-OM3. the above Electrical actuators
are designed for use on industrial and control
valves suitable to be installed on heavy
industrial, chemical, petrochemical, plants,
refinery and/or pipelines for hazardous fluids.
the Electrical actuators EPI-2 with OM3
are produced by Biffi Italia and identified by
Product designation: EPI-2-XXX/OM3. for the
general Instructions relevant to the Installation,
Operation and configuration, Maintenance and
trouble-shooting, the base Instruction and
Operating Manual VcIOM-02881 must be used.
the Electrical actuators EPI-2-OM3 are
designed in accordance with the applicable
International rules and Specifications but
in any case the following regulations must
be observed:
• The general installation and safety
regulations effective at site of installation.
• The proper use of personal protective
devices (glasses, clothing, gloves).
• The proper use of tools, lifting and
transport equipment.
WarnIng
Before the installation in hazardous areas, as
defined by the local rules, it is mandatory to check
if the nameplate of the Electric Actuator specifies
the appropriate degree of protection.
7.3 checK for rIght appLIcatIon
Before the installation, check for protection
mode and for the ambient temperature range
written on the appropriate label.
WarnIng
Installation in ambient with the presence of
explosive atmospheres not covered by the
specified grade of protection specified in the label,
or which could reach temperatures outside the
range specified in the label, will invalidate the
safety and the warranty.
7.4 appLIcabLe standards
and reguLatIons
En ISO 12100-1 Safety of machinery - Basic
concepts, general principles
for design Part 1-Basic
terminology, methodology
En ISO 12100-2 Safety of machinery - Basic
concepts, general principles
for design Part 2-technical
principles and specification
IEc/En 60204-1 Electrical equipment of
industrial machines:
Part 1-General requirements
2006/42/Ec
Machinery directive
2006/95/Ec
Low Voltage directive
2004/108/Ec
EMc directive
7.5 terMs and condItIons
Biffi Italia guarantees each single product
to be free from defects and to conform to
current goods specifications. Except when
differently specified, the warranty period
in one year from the date of installation by
the first user, or eighteen months from the
date of shipment to the first user, whichever
occurs first. no warranty is given for products
which have been subject to improper storage,
improper installation, misuse, or which have
been modified or repaired by unauthorized
personnel. repair works due to improper use
will be charged at standard rates.
7.6 Manufacturer's LIabILIty
Biffi Italia declines all liability in the event of:
• Use of product in contravention of local safety
at work legislation.
• Incorrect installation, disregard or incorrect
application of the instructions provided on the
product nameplate and in this Instruction and
Operating Manual.
• Modification of the product without Biffi's
authorisation.
• Work done on the product by unqualified or
unsuitable personnel.
KEYSTONE
7
Advertisement
Table of Contents
