Incline Adjustment - Energetics POWER RUN 1060HRC Assembly Manual

Walking belt has shifted to the right: First unplug the power cord from the surge protector. Using the
hex key provided, turn the right rear roller adjustment bolt 1/4 turn in the clockwise direction. Plug the
power cord back into the surge protector and run the treadmill at 4 km/h (2.5 mph). You should see the
belt start to correct itself, moving back towards the center. Repeat the above procedure until the walking
belt is centered. It may be necessary to set walking belt tension once you have completed this procedure
if the belt feels like it is slipping while walking. Refer below to the "Walking belt slipping" instructions.
Walking belt is slipping: First unplug the power cord from the surge protector. Using the hex key
provided, turn both the left and right rear roller adjustment bolts the same distance, usually a 1/4 turn
in the clockwise direction. Plug the power cord back into the surge protector and run the treadmill at 4
km/h (2.5 mph). You should now walk on the belt to determine if the belt is still slipping. Repeat the
above procedure until the walking belt is not slipping. The tension should be just tight enough not to
slip.
WARNING! Do not over tighten rollers! This will cause premature roller bearing failure!
Right and left tension bolts are located at the rear of the treadmill.
Operations
Proper Training Clothes
Please make sure you always wear proper training shoes while working out. It is recommended that you
wear training appropriate exercise clothing's that allow you to move freely whilst exercising.
Exercise Level
Please contact a physician before your exercise program. Immediately stop exercising if you feel any pain
or tightness in your chest, become short breathed of faint. Please contact your doctor before you start
using your fitness product again.

Incline Adjustment

Computer controlled adjustment
The incline level can be increased or decreased on
the console (if applicable). Please consult the
computer manual for further information.
7