Xerox PHASER Phaser 7700 User Manual page 76

Print Defects and Potential Remedies (cont'd.)
Print-Quality Problem
,PDJH 2IIVHW
Toner appears to have been
pulled off the page and placed
about 84 mm (3.3 inches) across
the page from where it should be.
User Guide
0806-41
Potential Remedies
1.
Make sure that the paper you are
using is the correct type for the
printer and is correctly loaded in
the printer. From the front panel's
Printable Pages Menu, select the
Print Paper Tips Page.
2.
Make sure that the paper loaded in
the tray matches the paper type
selected on the printer's front
panel.
3.
If the problem continues, set the
paper type in the front panel to the
next lightest type of paper than
what you are using. Below is a list
of paper types from the lightest
weight to the heaviest:
Laser Paper
Heavy Laser Paper
Thin Cover/Index
Thick Cover/Index
Note: To access the Tray Setup Menu in
the front panel, reinsert the paper loaded
in the Multi-Purpose Tray (MPT) or pull
out and reinsert the Universal Tray.
When using the Multi-Purpose Tray
(MPT) and Tray 1, the front panel always
prompts you to select the paper type.
When using trays 2-4, the front panel
only prompts you to select the paper
type when you have previously selected
Heavy Laser Paper.
59