Automatic 2-Sided Printing - Xerox PHASER Phaser 7700 User Manual

Automatic 2-Sided Printing

Automatic 2-sided printing (duplexing) is available from trays 1-4; it is
not available from the Multi-Purpose Tray (MPT).
Automatic 2-sided printing is available for all paper sizes that are
supported by trays 1-4 but only when the paper type is set to either
Laser Paper or Heavy Laser Paper. Paper weight must be between
2
64-105 g/m (17-28 lb. bond). For best results with 2-sided printing,
2
use 90 g/m (24 lb. bond) laser paper.
Note
See Manual 2-Sided Printing (page 41) for information about
duplexing heavier paper weights.
For best results with automatic 2-sided printing, do not use heavy
toner coverage on the even-numbered pages of your print job.
Caution
Use only laser bond paper for automatic 2-sided printing in
the Universal trays. Do not use any specialty paper (such as
glossy coated paper) to print automatic 2-sided printing.
Damage caused by using unsupported paper for 2-sided
printing may not be covered by the printer's warranty.
User Guide
37