Importing A Clone File - LG Pro:Centric 43UT570H Setup Manual

(Continued from previous page)
9. Modify the filename, as required. While the TV model element of the filename may not be
changed, you can differentiate this Clone file from other UT570H/UT577H Clone files by
changing the numeric assignment appended to the end of the filename. Select/highlight the
filename, and then use the Up/Down arrow keys on the Installer Remote to scroll through
numeric assignments until the desired number is shown.
10. When you are ready to continue, i.e., when you have selected the desired filename, press
OK on the Installer Remote to select/activate the EXPORT button at the top right of the
screen, and then press OK on the Installer Remote once more to export the file.
Export progress will be displayed on the screen. This process may take a few minutes. Do
NOT remove the USB device while exporting is in progress. When the export process is
complete, an "Export Clone File is completed" pop-up message will be displayed on the screen.
11. Press OK to return to the TV Manager / Data Cloning screen. To return to program viewing,
select the button at the top right corner of the screen.
X
12. Remove the USB memory device from the Master TV.
Note: If the Master TV has a channel lineup, during the export process, logical
channel numbers are automatically assigned in ascending order, starting with 0
(zero), to the physical RF channels of the TV channel lineup to create an FTG
Channel Map. See also note below.
Note: If the exported Clone file is to be used for FTG Mode via CPU configuration
(i.e., it contains an FTG Channel Map), it is highly recommended that you open the
file in the Cloud Configuration Tool—BEFORE transferring (importing) the file to any
Target TVs—to verify FTG Channel Map and FTG Installer Menu settings. This will
also enable you to confirm channels and add channel attributes, labels, etc.

Importing a Clone File

This section describes how to transfer (import) a Clone or Configuration (.tlx) file from a USB
memory device to a TV using the TV Manager "Import Clone File" option. The ".tlx" file may be
created either from a Master TV Setup that was saved (exported) from a Master TV or in the
Cloud Configuration Tool.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• Avoid using special characters, such as ?, &, @, etc., in the Clone/Configuration (.tlx) filename.
• If you have initiated the EZ-Manager Wizard, you can use the wizard's "USB Configuration"
option to access the TV Manager and complete the import procedure (see "TV Configuration
Options" and/or "USB Configuration" on pages 21 and 29, respectively, as necessary).
• You may also use the Ez Download utility to import the Clone/Configuration (.tlx) file. See "Ez
Download Utility" on pages 31 to 34 for further information.
206-4341
Cloning Procedures
(Continued on next page)
51