Network Settings - LG Pro:Centric 43UT570H Setup Manual

Commercial mode

Hide thumbs

Table Of Contents

Table of Contents

(Continued from previous page)

Note: The Zoning feature is only applicable for TVs that will be configured using a ".tlx" file (local or

remote configuration).

1. Complete the appropriate field(s) as described below. Use the Up/Down arrow keys on the

Installer Remote to navigate between each of the fields.

• TV Zone: Enables you to set a TV Zone # so that the TV can be configured with Installer Menu

and/or Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or

Setup Menu settings may be provided in a Clone/Configuration (.tlx) file. If the TV is being

configured for FTG Mode via CPU, the TV Zone # setting also allows the TV to omit channels

that have been restricted in the FTG Channel Map.

To change the TV Zone from its default value (0), navigate to the TV Zone field, and use the

Left/Right arrow keys to specify the desired TV Zone # (1–8).

• Label: Allows you to select a North, South, East, or West text label for this TV. In the Label

field, use the Left/Right arrow keys to select the applicable label.

• Room Number: Allows you to specify the number of the room—up to 16 characters—in

which the TV is located. To enter a room number, navigate to the Room Number field and

press OK. You can then use the number keys on the Installer Remote to direct enter a room

number, or you can use the arrow keys to select the appropriate alphanumeric character(s)

from the pop-up virtual keyboard at the bottom of the screen. When you are done, select

Enter from the virtual keyboard, and then press OK on the Installer Remote.

2. When you are ready to continue, use the arrow keys to select SAVE, and then press OK on the

Installer Remote to return to the TV Configuration Options screen. Then, proceed as required

from the TV Configuration Options screen.