LG Pro:Centric 43UT570H Setup Manual page 26

EZ-Manager Wizard (Cont.)
(Continued from previous page)
Note: If, after completing the search, the TV is unable to find the Pro:Centric data channel (while the
Searching for Pro:Centric Server screen is on display), the wizard will stop and show a Diagnostics
screen that enables you to manually return to the previous screen (to reinitiate the configuration) or
exit the wizard.
When the Pro:Centric Configuration is complete, an EZ-Manager Configuration Complete screen is
displayed (see example below), and after 10 seconds, the wizard exits, and the TV turns OFF.
EZ-MANAGER CONFIGURATION COMPLETE
TV will turn off in 10 second(s)
Installed Components
Pro:Centric Application GEM application downloaded
Pro:Centric Application
Maintenance files Config.tlx
Maintenance Files
REBOOT TURN OFF
Note: With the EZ-Manager Configuration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.
Manual Pro:Centric Configuration
1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on
the Installer Remote to select MANUAL PRO:CENTRIC at the bottom of the screen, and then
press OK.
In the Pro:Centric Manual Configuration screen (see examples below), you will be able to
configure the appropriate Pro:Centric settings in the TV. Use the Up/Down arrow keys on the
Installer Remote to navigate between fields.
2. In the Pro:Centric Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric
Application Mode—GEM (Java), HTML, or CONFIGURATION ONLY.
Note: For remote management only, select CONFIGURATION ONLY. The TV will search for
TV E-Z Installation data downloads; however, Pro:Centric application data will not be downloaded,
i.e., Installer Menu item 098 PRO:CENTRIC will be set to 0.
3. Refer to the appropriate subsection below, depending on the Pro:Centric server configuration, to
complete the remaining fields.
26
Installed Components
GEM application downloaded
LY970H_Config.tlx
(Continued on next page)
206-4341