LG Pro:Centric 43UT570H Setup Manual page 54

Cloning Procedures (Cont.)
(Continued from previous page)
DATA CLONING
< 01
USB 1: Device Name
Select the file to download, and then select UPDATE.
Import Clone File
9. Use the arrow keys on the Installer Remote to select/highlight the ".tlx" file to import, and then
press OK.
Note: Filenames of exported Clone files are comprised of the TV model and a numeric element,
for example, xxUT570H0UA_1.TLX.
10. If the Clone/Configuration (.tlx) file includes an FTG Channel Map, you can choose the format
for the channel tuning/banner display. Use the arrow keys to select the desired Channel
Tuning / Channel Banner Display option—either Logical or Physical—at the right side of the
screen. A checkmark will appear at the left of the selected option. Logical tuning is selected by
default.
Note: If the ".tlx" file does not include an FTG Channel Map, the message, "No Channel Map in
Clone file," will be displayed at the right of the screen.
11. When you are ready to continue, select UPDATE on the screen and then press OK on the
Installer Remote.
Import progress will be displayed on the screen. This process may take a few minutes. Do
NOT remove the USB device while importing is in progress. When the import process is
complete, an "Import Clone File is completed" pop-up message will briefly be displayed on
the screen, and then, the TV will reboot.
12. Remove the USB memory device from the Target TV, and verify that the appropriate
configuration is now resident on the Target TV.
Note: If the Target TV was previously in Pass-through Mode, and the Clone/Configuration (.tlx)
file that was imported contained an FTG Channel Map, the Target TV CPU is now in FTG Mode.
Upon restart, the TV tunes according to the Start Channel setting in the Installer Menu. If a Start
Channel is specified, the TV will tune to that channel, though, in the case of FTG Mode via CPU
configuration, a channel banner will only be displayed if the Start Channel is included in the FTG
Channel Map (depending on your selection in step 10, the channel banner will display either the
Start Channel's logical channel number or physical RF channel number). Otherwise, the TV will
either return to the last channel tuned (TV in Pass-through Mode) or tune to the first channel in the
FTG Channel Map (TV in FTG Mode via CPU). If the latter, remember that the channels in the FTG
Channel Map are always arranged in logical order, regardless of your selection in step 10.
54
None
ChMap_IM.tlx
X
UPDATE
Channel Tuning / Channel
Banner Display
Logical
Physical
206-4341