Tll-1100A Clone Connections/Learning And Teaching Setups - LG 22LG3DCH Owner's Manual

COMMERCIAL MODE SETUP
N
0
I'rl
N
0
I-I-I
I-I-I
-t
c
TLL-1100A CLONE CONNECTIONS/LEARNING AND
TEACHING SETUPS
Connections for the TLL-1100A Clone Programmer to Learn the Master TV Setup
On Master TV
Set up all Master TV features on ..................
Selected Bank: CBank X Saved
the menus and do a Channel '_'_'_"E%'_'T=_"_? '' _o,,,,_
Search. Add Channel and Aux
_3> ...................
[ (oi(/_TV')
(4) SET TV CLOCK FROM CLONE |
(5) DISPLAY TV SETUP
!
labels etc. Tune in an analog <6> ..................
channel. Insert MPI cable into TV ................ 't
TV CLOCK = 66:66 V
THE CLONE IS VERSION V2.2.2
M.P.I. Learning Setup
i
MPI port.
- ....... g
...................
On TLL-1 100A
1. Turn On the TLL-1100A.
2. Use the Mode button to select
Clone Mode.
3. Use the Left/Right arrow to
select the CBank (1 - 8) to
store the master TV setup in.
4. Plug the other end of the MPI
cable into the MPI port on the
bottom of the TLL.
5. With the Installer remote con-
trol, select item 1 on TLL
menu.
6. Press Enter, to transfer the
Master TV setup into CBankX
on the TLL The TLL will copy
the master TV setup.
Z When learning is done, discon-
nect MPI cable from Master
TV.
-..s
o_o
A
M.P.I. Teaching Setup
6
-T-
CLONE SELECTION MENU
Selected Bank: CBank X Saved
1) LEARN FROM TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
CLONE CLOCK = 66:66
TV CLOCK = 66:66
THE CLONE IS VERSION V2.2.2
-To change menu items, Press
i
i
On Target TV
1. Connect MPI cable from the
TLL to the MPI port on the
Target TV. Assure that the
correct CBank(X) is selected
on TLL.
2. With the Installer remote con-
trol, select item 2 to Teach
the target TV the master TV
setup.
3. Press Enter to begin teaching.
4. When Teaching is done, dis-
connect MPI cable and power
the TV Off. Unplug TV power
cord.
5. Reconnect TV power cord.
Power the TV On and the
master TV setup should be
resident on the target TV.
Warning: Do not use the TLL-1100A while any PPV card is
installed or clone programmer device will be damaged.
Notes: It is assumed that the TV is connected to a signal
source, the TV source selected is Antenna (RF) In, the signal is
from an Analog channel, not a digital channel, all equipment is
connected to power and turned on and the TLL-1100A Cloner
main menu is displayed on the TV screen, see above.
96