Cloud Configuration Tool Overview; Creating An Ftg Configuration File - LG Pro:Centric 43UT570H Setup Manual

Commercial mode

Hide thumbs

Table Of Contents

Table of Contents

As indicated in the introduction to this document, there are two separate and distinct methods for

configuring UT570H/UT577H TVs for FTG Mode of operation: one method is to configure the TV CPU

for FTG Mode operation, while the other is to configure the TV EBL for FTG Mode operation. FROM A

LOCAL CONFIGURATION STANDPOINT, EACH OF THESE METHODS IS MUTUALLY EXCLUSIVE. IF

THE CPU IS IN FTG MODE, THE EBL CANNOT BE SWITCHED TO FTG MODE. LIKEWISE, IF THE

EBL IS IN FTG MODE, THE CPU CANNOT BE SWITCHED TO FTG MODE.

This section provides an overview of LG's Cloud Configuration Tool web application, which is used for FTG

Mode via CPU configuration. For best results, it is recommended that you access the Cloud Configuration

Tool using one of the following web browsers: Google Chrome™ 51 or later or Mozilla Firefox

Creating an FTG Configuration File

The subsections below briefly describe how to use the Cloud Configuration Tool to create an FTG

Configuration (.tlx) file that can be used to configure the TV for FTG Mode via CPU. The Cloud

Configuration Tool provides options both for advanced and new users. If you are not familiar with the steps

to create an FTG Configuration file, you may choose a Wizard Setup that will guide you through the

process of creating a new file. Refer to the Cloud Configuration Tool User Guide for further information.

Note: There is also an option to save (export) configuration from a TV, which may be desirable or required

if you want to save customized TV setup menu settings to the FTG Configuration file and/or if you do not

know the RF channels at the site. See "Exporting a Clone File" on pages 49 to 51 for further information.

Access the Cloud Configuration Tool and Select a Setup Option

1. Launch a web browser, and navigate to the following URL: cct.procentric.tv.

2. On the Welcome web page, make sure North America (default) is selected in the Select Your Region

field, and then click on the SELECT button at the right of the field.

3. Once you select your region, you can choose the desired setup option, depending on your familiarity

with the utilities and/or your file requirements:

206-4341