LG Pro:Centric 43UT570H Setup Manual page 70

Reference: Downloading a Boot Logo Image using a USB Memory
Device (Cont.)
(Continued from previous page)
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
5. Use the arrow keys to select Image Download, and then press OK.
IMAGE DOWNLOAD
< 01
USB 1: Device Name
Select the file to download, and then select DOWNLOAD.
Boot Logo Image
None
6. In the image area at the right of the screen, use the arrow keys to select/highlight the image
file to download. Press OK to select a file (a checkmark
image guidelines at the beginning of this section.
7. When you are ready to download the image file, select DOWNLOAD on the screen, and then
press OK on the Installer Remote.
Download progress will be displayed on the screen. Do NOT remove the USB device until the
image download is complete. When the download process is complete, a "Complete" message
will be displayed on the screen, and a "DONE" button will be displayed/activated at the top
right of the screen.
8. Check the download status—at the left of the screen—for the image to make sure the download
was successful, and then press OK on the Installer Remote to select DONE.
When you select "DONE," the Image Download screen will be redisplayed. You can perform other
TV Manager functions, as required, or exit the TV Manager.
70
X
DESELECT ALL DOWNLOAD
identifies a selected file). See also
206-4341