Internet Access - ZyXEL Communications LTE3301 Series User Manual

Reset the device to its factory defaults, and try to access the LTE3301 with the default IP address. See
5
Section 1.5 on page
If the problem continues, contact the network administrator or vendor, or try one of the advanced
6
suggestions.
Adva nc e d Sug g e stio ns
• Try to access the LTE3301 using another service, such as Telnet. If you can access the LTE3301, check
the firewall rules to find out why the LTE3301 does not respond to HTTP.
• If your computer is connected to the
connected to a
I can see the
L o g in
Make sure you have entered the user name and password correctly. The default user name is
1
and the default password is
This can happen when you fail to log out properly from your last session. Try logging in again after 5
2
minutes.
Disconnect and re-connect the power adaptor or cord to the LTE3301.
3
If this does not work, you have to reset the device to its factory defaults. See
4
21.4 Inte rne t Ac c e ss
I cannot access the Internet.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
1
Start Guide.
Make sure your mobile access information (such as APN) is entered correctly in the wizard or the WAN
2
screen. These fields are case-sensitive, so make sure [Caps Lock] is not on.
Make sure your SIM card's account is valid and has an active data plan. Check your service contract or
3
contact your service provider directly.
If the problem continues, contact your ISP.
4
I cannot access the Internet anymore. I had access to the Internet (with the LTE3301), but my
Internet connection is not available anymore.
Chapter 21 Troubleshooting
12.
/ port.
L AN ET HERNET
screen, but I cannot log in to the LTE3301.
. This field is case-sensitive, so make sure [Caps Lock] is not on.
1234
LTE3301 Series User's Guide
port or is connected wirelessly, use a computer that is
WAN
135
a dm in
Section 1.5 on page 12.