Internet Access - ZyXEL Communications LTE4506-M606 User Manual

Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
LTE4506 Access and Login
Make sure the LTE4506 is correctly installed and turned on. See the Quick Start Guide and
2
page 11.
Make sure your Internet browser does not block pop-up windows and has enable JavaScripts.
3
Make sure your computer is connected to the LTE4506 and is in the same subnet as the LTE4506.
4
Reset the device to its factory defaults, and try to access the LTE4506 with the default IP address. See
5
Section 1.8 on page
Disconnect your computer from the Internet (wireless and/or Ethernet) and then reconnect the LTE4506
6
again.
If the problem continues, contact the vendor.
7
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
I can see the Login screen, but I cannot log in to the LTE4506.
Make sure you have entered the user name and password correctly. The default password is 1234. This
1
fields are case-sensitive, so make sure [Caps Lock] is not on.
This can happen when you fail to log out properly from your last session. Try logging in again after five
2
minutes.
Disconnect and connect to the LTE4506 again.
3
If this does not work, you have to reset the device to its factory defaults. See
4

9.4 Internet Access

I cannot access the Internet through a 3G/4G wireless WAN connection.
Chapter 9 Troubleshooting
13.
LTE4506 User's Guide
90
Section 1.5 on
Section 1.8 on page 13.
Section 1.8 on page 13.