ZyXEL Communications LTE3301 Series User Manual page 128

Maintenance > Time
Fig ure 92
The following table describes the labels in this screen.
Table 59 Maintenance > Time
L ABEL DESC RIPT IO N
Current Time and Date
Current Time This field displays the time of your LTE3301.
Each time you reload this page, the LTE3301 synchronizes the time with the time server.
Current Date This field displays the date of your LTE3301.
Each time you reload this page, the LTE3301 synchronizes the date with the time server.
Current Time and Date
Manual Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
New Time This field displays the last updated time from the time server or the last time configured
manually.
(hh:mm:ss)
When you select
New Date This field displays the last updated date from the time server or the last date configured
manually.
(yyyy/mm/dd)
When you select
Get from Time Server Select this radio button to have the LTE3301 get the time and date from the time server you
specified below.
User Defined Time Select
Server Address ASCII characters in length) of your time server. Check with your ISP/network administrator if
you are unsure of this information.
Time Zone Setup
Chapter 20 Maintenance
, enter the new time in this field and then click
Ma nua l
, enter the new date in this field and then click
Ma nua l
Use r De fine d T im e Se rve r Addre ss
LTE3301 Series User's Guide
128
and enter the IP address or URL (up to 20 extended
.
Apply
.
Apply