Upnp Screen; Technical Reference; Using Upnp In Windows Xp Example - ZyXEL Communications LTE3301 Series User Manual

When a UPnP device joins a network, it announces its presence with a multicast message. For security
reasons, the LTE3301 allows multicast messages on the LAN only.
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
18.3 UPnP Sc re e n
Use this screen to enable UPnP on your LTE3301.
Click
Ma na g e m e nt > UPnP
Management > UPnP
Fig ure 78
The following table describes the fields in this screen.
Table 54 Management > UPnP
L ABEL
UPnP
Apply
Cancel
18.4 T e c hnic a l Re fe re nc e
The sections show examples of using UPnP.
18.4.1 Using UPnP in Windo ws XP Exa m ple
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP installed
in Windows XP and UPnP activated on the LTE3301.
Make sure the computer is connected to a LAN port of the LTE3301. Turn on your computer and the
LTE3301.
18.4.1.1 Auto - disc o ve r Yo ur UPnP- e na b le d Ne two rk De vic e
Click and
1
sta rt
Gateway.
Right-click the icon and select
2
Chapter 18 Universal Plug-and-Play (UPnP)
to display the screen shown next.
DESC RIPT IO N
Select to activate UPnP. Be aware that anyone could use a UPnP application to
Ena b le
open the web configurator's login screen without entering the LTE3301's IP address (although
you must still enter the password to access the web configurator).
Click to save the setting to the LTE3301.
Apply
Click to return to the previously saved settings.
C a nc e l
. Double-click
C o ntro l Pa ne l
Pro pe rtie s
LTE3301 Series User's Guide
. An icon displays under Internet
Ne two rk C o nne c tio ns
.
118