Status Screen - ZyXEL Communications LTE3301 Series User Manual

Table 6 Navigation Panel (continued)
L INK
Routing
Interface
Group
Security
Firewall
Content Filter
IPv6 firewall
Management
Bandwidth
Management
UPnP
TR069
Ma inte na nc e
General
Account
Time
Firmware
Upgrade
Backup/
Restore
Restart
2.4 Sta tus Sc re e n
Click to open the status screen.
Chapter 2 Introducing the Web Configurator
T AB FUNC T IO N
Static Route Use this screen to configure IP static routes.
Dynamic Use this screen to enable and configure RIP on the LTE3301.
Routing
Interface Use this screen to create a new interface group.
Group
General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/add a
firewall rule.
Content Filter Use this screen to restrict web features and designate a trusted computer. You
can also block certain web sites containing certain keywords in the URL.
Services Use this screen to configure IPv6 firewall rules.
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
UPnP Use this screen to enable UPnP on the LTE3301.
TR069 Use this screen to configure your LTE3301 to be managed by an ACS.
General Use this screen to view and change administrative settings such as system and
domain names.
User Account Use this screen to change the user name and password of your LTE3301.
Time Setting Use this screen to change your LTE3301's time and date.
Firmware Use this screen to upload firmware to your LTE3301.
Upgrade
Backup/ Use this screen to backup and restore the configuration or reset the factory
Restore defaults to your LTE3301.
System Restart This screen allows you to reboot the LTE3301 without turning the power off.
LTE3301 Series User's Guide
21