ZyXEL Communications LTE3301 Series User Manual page 47

Table 12 Monitor > LTE Modem Status (continued)
L ABEL DESC RIPT IO N
Module Name This displays the name of the built-in LTE module.
IMEI/MEID This displays the International Mobile Equipment Number (IMEI) or Mobile Equipment
Identifier (MEID), which is the serial number of the built-in LTE module. It is a unique 15-digit
number used to identify a mobile device.
HW Version This displays the hardware version of the built-in LTE module.
FW Version This displays the firmware version of the built-in LTE module.
SIM Status
SIM This displays the status of the inserted SIM card.
PIN Code Status This displays the status of PIN code authentication.
PIN Code Remaining This displays how many times you can enter the PIN code.
Times
PUK Code This displays how many times you can enter the PUK code.
Remaining Times
Service Information
Operator This displays the name of the service provider.
Cell Broadcast This displays whether the one-to-many messaging service is available.
MCC This displays the Mobile Country Code (MCC), which is used to identify the country of a
mobile subscriber.
MNC This displays the Mobile Network Code (MNC), which is used in combination with MCC to
identify the public land mobile network (PLMN) of a mobile subscriber.
LAC This displays the 2-octet Location Area Code (LAC), which is used to identify a location
area within a PLMN.
TAC This displays the Tracking Area Code (TAC), which is to identify a tracking area within a
PLMN.
Physical Cell ID This displays the ID of a cell at the physical layer.
Service Type This displays the type of the mobile network to which the LTE3301 is connecting.
Operation Band This displays the network type and the frequency band used by the mobile network to
which the LTE3301 is connecting.
RSSI This displays the received signal strength indicator (RSSI), that is, the received signal strength
in dBm.
CS Register Status This displays the Circuit Switched network registration status.
EcIo This displays the ratio (in dB) of the received energy per chip and the interference level.
PS Register Status This displays the packet switched network registration status.
PS Attached Status This displays the Packet switched Domain Attachment status.
Roaming Status This displays whether the LTE3301 is connected to another service provider's mobile network
using roaming.
IMSI This displays the International Mobile Subscriber Identity (IMSI) stored in the SIM (Subscriber
Identity Module) card. The SIM card is installed in a mobile device and used for
authenticating a customer to the carrier network. IMSI is a unique 15-digit number used to
identify a user on a network.
SMSC This displays the number for Short Message Service Center (SMSC), which stores, forwards
and delivers SMS text message.
MSISDN This displays the MSISDN (Mobile Subscriber ISDN) number, a phone number assigned to a
mobile subscriber to call a mobile device.
RSRP This displays the Reference Signal Receive Power (RSRP), which is the average received
power of all Resource Elements (RE) that carry cell-specific Reference Signals (RS) within the
specified bandwidth.
Chapter 5 Monitor
LTE3301 Series User's Guide
47
displays if there is no SIM card inserted.
N/ A