Figure 52 Settings> Internet > Dynamic DNS
The following table describes the labels in this screen.
Table 30 Settings > Internet > Dynamic DNS
LABEL
Dynamic DNS Setup
Dynamic DNS
Service Provider
Host Name
Username
Password
Apply
Cancel
9.9 UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities, and learn about other devices on the network. A device
can then leave a network smoothly and automatically when it is no longer in use.
See
Section 9.9.1 on page 98
Chapter 9 WAN
DESCRIPTION
Select Enable to use dynamic DNS. Select Disable to turn this feature off.
Select the name of your Dynamic DNS service provider.
Enter a host names in the field provided. You can specify up to two host names in the
field separated by a comma (",").
Enter your user name.
Enter the password assigned to you.
Click Apply to save your changes back to the NBG7815.
Click Cancel to begin configuring this screen afresh.
and
Section 9.9.2 on page 101
NBG7815 User's Guide
97
for more information on UPnP.