Husky 716 Dimensions - Graco Husky 515 D51 Series Instructions Manual

* Pumps with duckbill check
valves are shipped with the
inlet manifold on top and
the outlet manifold on the
bottom. To make the inlet
manifold on the bottom and
the outlet manifold on the
top, rotate each of the four
duckbill assemblies
vertically 180° as shown
below.
139
201
202
SIDE VIEW
2.76 in.
(62.5 mm)
3/4 npt(f) or
bspt(f)
Fluid Outlets
*
4.29 in.
(109.0 mm)
6.04 in.
(153.4 mm)
34 308981

Husky 716 Dimensions

4.25 in.
(108.0 mm)
1/4 npt(f)
Air Inlet
7.37 in.
(187.2 mm)
PUMP MOUNTING HOLE PATTERN
4.29 in.
(109.0 mm)
3/4 npt(f)
or bspt(f)
Fluid Inlets *
FRONT VIEW
4.44 in.
(112.8 mm)
6.62 in.
(168.1 mm)
3/4 npt(f) or bspt(f)
Fluid Inlets *
NOTE: Bottom port open on 243305,
243306, 243307 and 246485 only.
Four 0.28 in.
(7.1 mm)
Diameter Slots
3/4 npt(f), bspt(f) or
bspp(f)
10.43 in.
(264.9 mm)
9.18 in.
(233.2 mm)
7.80 in.
(198.1 mm)
1.38 in.
(35.1 mm)
3/4 npt(f), bspt(f) or bspp(f)
Fluid Outlet *
6.62 in.
(168.1 mm)
9078A