* Pumps with duckbill check
valves are shipped with the
inlet manifold on top and
the outlet manifold on the
bottom. To make the inlet
manifold on the bottom and
the outlet manifold on the
top, rotate each of the four
duckbill assemblies
vertically 180° as shown
below.
139
201
202
SIDE VIEW
2.76 in.
(62.5 mm)
3/4 npt(f) or
bspt(f)
Fluid Outlets *
4.29 in.
(109.0 mm)
6.04 in.
(153.4 mm)
Husky 716 Dimensions
4.25 in.
(108.0 mm)
1/4 npt(f)
Air Inlet
7.37 in.
(187.2 mm)
(109.0 mm)
3/4 npt(f)
or bspt(f)
Fluid Inlets *
FRONT VIEW
4.44 in.
(112.8 mm)
6.62 in.
(168.1 mm)
3/4 npt(f) or bspt(f)
Fluid Inlets *
NOTE: Bottom port open on 243305,
243306, 243307 and 246485 only.
PUMP MOUNTING HOLE PATTERN
Four 0.28 in.
(7.1 mm)
Diameter Slots
4.29 in.
3/4 npt(f), bspt(f) or bspp(f)
Fluid Outlet *
10.43 in.
(264.9 mm)
9.18 in.
(233.2 mm)
7.80 in.
(198.1 mm)
1.38 in.
(35.1 mm)
3/4 npt(f), bspt(f) or bspp(f)
Fluid Outlet *
6.62 in.
(168.1 mm)
9078A
308981 33