Fuser Jam
Follow the procedure below to clear a paper jam when
paper is jammed in the fuser.
1
2
3
4
5
6
7
8
9
10
11
Power OFF the printer and disconnect the power cord.
Open the rear cover.
Let the fuser area cool for 40 minutes.
Remove the Duplex Module, if installed.
Remove the screw at the left side of the fuser cover (1).
Flip down the fuser cover.
Remove the jammed paper.
Close the fuser cover and replace the screw.
Replace the Duplex Module, if removed.
Close the rear cover.
Plug in the power cord and power ON the printer.
Chapter 5: Clearing Jams and Jam Recovery
Clearing Paper Jams
5-19