Loading Paper; Using Tray 1 - Xerox DocuPrint N17 User Manual

Loading Paper

Loading Paper

Using Tray 1

4-6 DocuPrint N17/N17b User Guide
The DocuPrint N17 accepts paper into Tray 1 (see below),
the MBF (see page 4-9), the optional 500-sheet Paper
Deck and Cassette (see page 4-14), the optional
2,000-sheet High Capacity Feeder (see page 4-17), and
the optional Envelope Feeder (see page 4-20).
Tray 1 holds 250 sheets of 20 lb (75 g/m
the section "Selecting Paper" (page 4-2) for acceptable
paper sizes and weights.
• Do not attempt to load ANY tray during printing.
• Do not overfill the tray.
1
Press down on the bottom plate of the paper tray until it
clicks into position.
If you are not changing paper size, go to Step 4 on page
4-7. Otherwise, continue to Step 2.
If you are changing to a smaller size, perform
Steps 2 and 3 in reverse order.
2
Push in on the size lock button (1) and slide end guide A
(2) out.
2
) paper. Refer to